• September 15, 2020 at 11:35 pm #37405
    Khalid AliKhalid Ali


    I have been fiddling around with DIVA Korg/Jupiter oscillators trying to get this deep house bass

    Starts around 1:30, it seems to be a mix of primarily saw with square for sub. I can get the sub to work but I cannot get the sound to growl like this?

    Is this some sort of distortion?

    Any leads would be great

    September 16, 2020 at 10:33 pm #37420
    Jonathan EppeleJonathan Eppele

    Wow, I love this bass sound. I have a liking for deep house and punchy bass sounds like this 🙂

    I did not have to use a sub oscillator to get a pretty close recreation. Here’s the gist of what I did:

    Osc: Saw. If you’re having trouble getting a growling sound, try playing an octave lower.

    Filter: Low Pass, 24 dB. Turn it WAY down. It’ll be so far down you’ll need to boost your main volume. Turn on Key Tracking for this, as well, so your cutoff is applied evenly.

    On each of these notes, I hear a little punch, and that seems to come from…

    Pitch Envelope: Give it a very fast decay, and a decent amount.

    Hope this helps!

    September 20, 2020 at 2:07 am #37534
    Khalid AliKhalid Ali

    Awesome I got very close!

    Thank you! didn’t realise the pitch env was on there, so sneaky

    September 20, 2020 at 6:15 am #37537
    Jonathan EppeleJonathan Eppele

    Glad to help! Happy you got a close recreation 🙂

You must be logged in to reply to this topic.